Screwdriver, Fill caps, Figure 10 – Bolens 131-410A User Manual
Page 8: Large tab opehr, Filling, Poison/danger, Causes severe burns
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Screwdriver
Fill Caps
4. Remove the six fill caps from the top of the
— battery. A screwdriver will make it easier. See
figure 10.
FIGURE 10.
.! ; , ;
Large Tab
Opehr
mli
4
ii
■?
Filling
Adapter
-Hose
Fill Caps
FIGURE 11.
Upper Letrel
Marked on
Front of
Battery
5. Lay acid package down, with “push in” facing
up. Using thumb, push in small perforated tab
at dot on front of package. Tear down large tab
to solid line, exposing hose. Do not use a
sharp tool or object to open acid package.
6. Pull out hose from package and hold upright.
Squeeze hose forcing all acid back into
package. Cut off tip of hose and insert filling
------adapter. See figure 11.
7. Fill each cell to (upper level) marked on front
of battery. Reassemble fill caps to battery.
See figure 11. Allow the battery to sit for 20
minutes.
POISON/DANGER
CAUSES SEVERE BURNS
Contains sulfuric acid. Avoid contact with skin,
eyes or clothing. Antidote: EXTERNAL—Flush
with water. INTERNAL—Drink large quantities of
water or milk. Follow with milk of magnesia,
beaten egg or veg. oil. Call physician immediately.
Eyes; Flush with water for 15 minutes and get
prompt medical attention.
Batteries produce explosive gases. Keep sparks,
flame, cigarettes away. Ventilate when charging
or using in enclosed space.
Always shield eyes when working near batteries.
KEEP OUT OF REACH OF CHILDREN
-8. Figure 12 shows the battery box in which the
battery will be mounted.
FIGURE 12.