5 installation checklist, Generator compartivient, Cooling and ventilating mr – Generac Power Systems 004270-1 User Manual
Page 38: Diesel fuel system, Exhaust system, Electrical conneoions, Battery installation, Post installation tests, Date of installation name of installer, Signature of installer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

POST-1
INSTALLATION
START-UP
CHECKS
Section 3 - Post-installation Start-up Checks
QUIETPACF“ 75D Recreational Vehicle Generator
3.5 INSTALLATION CHECKLIST
♦ LOCATION AND SUPPORT__________________
□ Generator is properly located.
□ Generator is properly supported.
□ Generator is properly restrained.
♦ GENERATOR COMPARTiVIENT
□ Compartment construction is proper.
□ Holes/Openings are vapor-sealed.
□ Compartment size is correct.
□ Compartment is vapor-sealed.
□ Sound insulation is correct.
□ Floor cutouts are properly completed.
♦ COOLING AND VENTILATING
M R
□ Airflow is adequate.
□ Air inlet opening is correct.
□ Compensate for restrictions.
□ Check that installation has been tested.
♦ DIESEL FUEL SYSTEM
□ Fuel tank complies with all applicable codes.
□ Fuel system is properly installed and checked
for leaks.
♦ EXHAUST SYSTEM
□ Exhaust system complies with all applicable
codes.
□ Exhaust system is properly and safely installed.
♦ ELECTRICAL CONNEOIONS
□ Connections comply with local code requirements
and all National Electrical Codes.
□ Junction box is properly installed.
□ Wiring meets all standards.
□ All connections are correct.
□ Conduit is properly installed and sealed.
□ Generator is properly bonded to the vehicle.
♦ BATTERY INSTALLATION
□ Recommended battery is installed.
□ Recommended cables are installed.
□ Cables are clean and tight.
□ Cables are connected properly.
□ Proper ventilation is provided.
□ Terminals are coated with anti-corrosion grease,
and terminal covers are positioned.
♦ OPTIONAL ACCESSORIES
□ Check that remote start/stop panels (if used) are
installed properly.
□ Check that all other options and accessories (if
used) are installed properly.
♦ POST INSTALLATION TESTS
□ Check that all tests are completed properly.
DATE OF INSTALLATION
NAME OF INSTALLER
SIGNATURE OF INSTALLER
3S Generac® Power Systems, Inc.