Parallel ribbon cable, Connecting a power supply, Technical summary – Asus P55SP4 User Manual

Page 76

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Technical Summary

Connector and Port Cables

Floppy Drive ribbon cable

Parallel ribbon cable

IDE ribbon cable

Serial ribbon cables

& port bracket

Connecting A Power Supply

The system power supply connector is for a 5-volt power supply. To connect the

leads from the power supply, you should first make sure the power supply is

unplugged. Most power supplies have two leads. Each lead has six wires, two of

which are black. Orient the connectors so the black wires are in the middle.

Align the plastic guide pins on lead to their receptacles on the connector. You may

need to hold the lead at an angle to line it up. Once you have the guide pins

aligned, press the lead onto the connector so that the plastic clips on the lead

snap into place and secure the lead to the connector.

4 - 1 3