Asus P55SP4 User Manual
Technical update
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TECHNICAL UPDATE
Product Number:
Motherboard Version:
Manual Version:
P/I-P55SP4
1.2 and later
1.22
In order to better meet the needs of PC users, we have made some improve
ments in our motherboards. Please make the following changes in you manual.
1)
Page 2-7: The sentence, "The exception is you can install one single
sided > 2MB module in the SIMMl socket"
Page 2-9: The sentence, "The only exception is that you can install a
single module larger than 2MBin socket SIMM 1, with the other sock
ets empty.
Please change both of the above to the following:
Exception: You may install a single- or double-sided module of
either 4MB or larger in the SIMM 1 socket.
2)
Page 2-7: The two sentences, "DRAM Speed: 70ns or faster for 50, 60
or 66MHz external clock. EDO DRAM requires 60ns or faster for a
66MHz external clock setting."
Please change the above to the following:
DRAM speed requirements for both FP DRAM & EDO DRAM:
CPU internal clock (speed written on the CPU): 75, 90,120,150MH2
CPU external clock: 50 or 60MHz
Use 70ns or faster (the lower the number, the faster)
CPU internal clock (speed written on the CPU) 100,133,167MHz
CPU external clock: 66MHz
Use 60ns or faster (the lower the number, the faster)
3)
Page 4-11: The note, "Note: The mainboard has no "Turbo" function,
so a switch will not work if you connect one. If you connect a case-
mounted Turbo LED, the LED will light while the system is turned on."
Please change the above to the following:
Note: This mainboard can support the Turbo On / Turbo Off switch
from the case. (Turbo Off decreases the speed of the system.)
P/I-P55SP4 User's Manual
Document Outline
- Copyright
- Table of Contents
- Feature Guide
- Upgrade Guide
- Software Guide
- Award BIOS Setup
- NCR SCSI BIOS & Drivers
- Flash Memory Writer Utility
- Technical Summary
- Jumper Setting Summary
- PS/2 Mouse Port Selector: JP5
- PS/2 Mouse PS/2 Mouse
- SRAM Type Selector JPG, JP7, JP8 & JP9
- Mixed Mode SRAM
- Level 2 Cache Size: JP10&JP11
- CPU External Clock Speed Selector: JP12, JP13 & JP14
- 1.5xExtClk 2xExtClk 2.5xExtClk SxExtClk
- 3.3V+5%
- STD/VR
- Voltage Regulator Module Selector: JP32, JP33, JP34, JP35
- UART2/IR Selection: JP1A & JP1B
- Super I/O Selection: JP1C
- Level 2 Cache Options
- External Connections
- The PCI-SC200 SCSI Interface Card
- Declaration of Conformity
- Jumper Setting Summary