Asus P55SP4 - Manual (Page 54)

Software Guide
Setting Supervisor & User Passwords
The "SUPERVISOR PASSWORD" and "USER PASSWORD"
options set passwords. The Supervisor Password is for system and
Setup Utility access. The User Password is for the system only. The
mainboard ships with no passwords. To create a password, highlight
the type you want and press the key. At the prompt, type
your password. The password is case sensitive, and can be up to 8
alphanumeric characters. Press after you have finished typ­
ing in the password. At the next prompt, confirm the new password
by re-typing it and pressing again. When you're done, the
screen automatically reverts to the main screen. Remember, when you
use this feature, the "Security Option" line in BIOS FEATURES
SETUP will determine when entering the password will be required.
To disable either password, press the key instead of en­
tering a new password when the "Enter Password" dialog box ap­
pears. A message confirms the password has been disabled.
Password Setting
ROM PCI/ISA BIOS(PI-55SP4)
CMOS SETUP UTILITY
AWARD SOFTWARE,INC.
STANDARD CMOS SETUP SUPERVISOR PASSWORD
BIOS FEATURES SETUP USER PASSWORD
CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION
POWER MANAGEMENT SETUP SAVE & EXIT SETUP
PCI/PNP & ONBOARD I/" " 'OUT SAVING
LOAD BIOS DEFAULTS
Enter Pasaword: *****
LOAD SETUP DEFAULTS
ESC : Quit : Select Item
FIO : Save fc Exit Setup {SHIFT)F2 : Change Color
Change/Set/Disable Password
3 - 2 5