Ide hdd auto detection screen, Software guide – Asus P55SP4 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Software Guide
IDE HDD Auto Detection Screen
ROM PCT/ISA BIOS(PI-55SP4)
CMOS SETUP UTILITY
AWARD SOFTWARE,INC.
HARD DISKS
TYPE SIZE CYLS HEADS PRECOMP LANDZ SECTOR MODE
Primary Master:
Select Primary Master Option (N=Skip)? N
OPTIONS SIZE
CYLS. HEADS PRECOMP LANDZONE SECTORS MODE
1(Y)
307
790
15
65535
790
57 NORMAL
Note: If you are setting up a hard disk that supports LBA mode,
three lines wiU appear in the parameter box. Choose the line that lists
LBA for an LBA drive. Do not choose Large or Normal.
Important!: This utility will only detect one set of parameters for
an IDE hard drive. Some IDE drives can use more than one set. This
is not a problem if the drive is new and there is nothing on it. If the
hard disk drive is already fuUy formatted when you install it, and dif
ferent parameters than those detected here were used, you will have
to enter them manually.
If the parameters listed don't match the ones used when the drive
was formatted, the drive won't be readable. If the auto-detected pa
rameters displayed do not match the ones that should be used for
your drive, do not accept them. Press the
ues and enter the correct ones manually from the Standard CMOS
Setup screen.
3 - 2 7