Asus P55SP4 - Manual (Page 58)

Software Guide
NCR SCSI BIOS & Drivers
The NCR 53C810 SCSI BIOS is recorded on the same flash
memory chip as the system BIOS. To use the on-board NCR SCSI
BIOS, the optional SC-200 SCSI controller card must be installed in
your system.
All SCSI devices you connect to your system require driver soft­
ware. The NCR SCSI BIOS directly supports SCSI hard disks under
DOS, Windows and OS/2. It also uses device drivers that are on the
DOS-format support floppy disk that comes with the SC-200 control­
ler card to support hard disks and other SCSI devices used with E>OS,
Windows, Windows NT, Novell NetWare and OS/2. These drivers
provide higher performance than the direct BIOS support. To use
these device drivers you must install them on your system hard disk
drive and add them to your system configuration files.There is also
driver support for SCSI devices used with SCO Unix. A second, SCO
Unix-format, support floppy disk has the Unix drivers on it.
See the "Readme" files that come with the drivers for instructions
on what they are and how to use them. You can print out the Readme
files with any text editor.
3 - 2 9