SINGER W4910 Euroflair - Manual (Page 9)

Connecting the foot control
Remove the cord from the foot control and place the
control under the table. Insert the foot control plug into
the socket on the right-hand side of the machine.
Connecting to the wall outlet
The voltage (V) and frequency (Hz) are indicated
under the base of the machine. Check that these values
correspond to those of the electricity source before
connecting the machine.
Connecting the machine
Free arm
Trouser legs and sleeves can be drawn onto the free
arm, making it easy to sew, mend or patch these parts.
The free arm also makes it much easier to attach collars
and cuffs as well as sew small children’s clothes, or dam
socks and stockings on the machine.
Extension table
When you need a larger working surface, attach the
extension table.
When positioning the extension table over the free
arm, fit the two studs into the holes at the rear of the free
ami. Pull out the catch under the front of the table and fit
it into the hole for this purpose on the free arm.
When removing the table, pull out the catch and lift
the table away.
"
L