Sewing buttonholes reinforced buttonholes – SINGER W4910 Euroflair User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sewing buttonholes

Reinforced buttonholes

Heavy garments and those subject to hard wear may

require reinforced buttonholes, which you can sew as
follows:

Set the stitch selector to symbol 1 and sew the

first column in the same way as for an ordinary

buttonhole, but increase the stitch length
slightly. When the column is sufficiently long,

stop the machine.

Turn to symbol 2-4. Sew the bar tack with

three or four stitches.

Turn to symbol 3. Sew the next column with
out a bar tack and stop the machine when the

»3

columns are equally long.

Turn to symbol 3.
Sew the second column once more.

Return to symbol 1. Sew the first column once
more. Stop when the correct length is reached.

Return to symbol 2—4. Sew the bar tack with
three or four stitches. Turn to symbol 1 and

fasten off by sewing a few stitches in the first
column.

■ '•'«a»! r w ICM^H