SINGER W4910 Euroflair User Manual

Page 42

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Maintenance

Changing the light bulb

The lamp is located to the left of the needle. First

remove the lamp guard. By inserting the small screw
driver in the recess at the left edge and applying slight

downward leverage, you can slide the guard down to the
stitch plate, as illustrated below.

To remove, press the light bulb upward, turn a quarter

turn in the direction of the arrow. To insert the new light
bulb, push it upward and turn it a quarter turn in the

direction of the arrow.

Use a light bulb of maximum 15 W, as indicated on the

rear of the machine.