SINGER W4910 Euroflair User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Threading, thread tension

Thread cutters

On the back of the presser bar you will find a notch,

the thread cutter, by means of which you can easily cut
off the threads when you have finished sewing. There is a
special thread cutter for the bobbin thread. See page 12

“Insertion of the bobbin case”.

Tension of the upper thread

The dial which regulates the tension of the upper

thread is graduated from 0-10. The higher the number,
the tighter the tension. Normal thread tension is ob
tained by setting the dial at the white index. Your ma
chine has been tested using the thread which accompa

nies it and with the thread tension dial at the white
index.

If using a coarser thread, it may be necessary to alter

the thread tension slightly. Also the type of fabric may
require that the tension be adjusted.

There is also a mark on the thread tension dial for the

tension that is suitable for making buttonholes. This set
ting is also suitable for satin stitching, decorative stitch
ing, topstitching, embroidering, etc.

ti------------------ * 1,—