SINGER W4910 Euroflair User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sewing with double-action stitch

Double-action stitch

Check that the needle is in the highest position. Turn

the stitch selector to the symbol

njumj].

Set the stitch length dial at 0.8 as a recommended basic

setting.

Use the double-action stitch for hemming and sewing

overlapped seams in tricot and soft material and also for
gathering with narrow, flat elastic or elastic cord.

Overlapped seams will be flexible and are excellent

for baby clothes. They are also recommended for sewing
leather. Lap one piece of fabric over the seam allowance
of the other piece. Sew along the open edge on the right

side. Turn the work and sew along the open edge on the
wrong side.

Patchwork will be very attractive if sewn with the

double-action stitch. Place the patches overlapping each
other 5 mm (%

") and sew with double-action stitching.

When gathering with narrow, flat elastic or elastic

cord, be sure the elastic does not get stitched in by
mistake but can run freely under the stitching. Use
presser foot B.

flPT.JUUU\/\AlUUlAnA/UirUinJ

u\ihijuuuu\n/mA/irinnn/u