SINGER W4910 Euroflair - Manual (Page 12)

Function
Presser bar lever
By means of the presser bar lever at the rear of the
machine, the presser foot can be raised and lowered.
When raising, the presser foot will remain in the raised
position, but the height can be increased by 1.5 mm by
pushing the presser bar lever upward and holding it in
this position. This is useful when you want to put gar­
ments with thick seams under the presser foot.
The presser foot should be lowered while sewing.
Presser foot pressure
The presser foot pressure can be adjusted with the aid
of a marked dial on the left side of the machine. Normal
pressure is obtained by setting the dial at the white dot
but for some fabrics it may be better to reduce or in­
crease the pressure. The higher the number, the greater
the pressure.
By setting the dial at the symbol ^ the presser foot
pressure is completely released. This setting should be
^ed when free-hand sewing with the darning foot, i.e.
darning, monogramming, machine embroidery and quilt­
ing.
If you turn the graded dial for the pressure foot pres­
sure to the lowest number, it is possible to dam with
presser foot A.
Lower the feed dog and move the fabric forward,
backward and sideways by hand.
f
'оc