Sears 113.23615 - Manual (Page 15)

speed Contro!/0n-0ff Knob
t.To turn machine ‘On’, place fingers on Speed Control/
On-Off Knob and pull out.
2. To turn machine ‘OFF’, push in Speed Controi/On-Off
Knob. Never Leave The Machine Unattended Until It
Has Come To A Complete Stop.
The variable speed control may be adjusted to the
approximate speeds identified on the control panel. Sug­
gested speeds are identified under “Choice of Blade and
Speed”. Turn the control knob clockwise
)
strokes per minute and counterclockwise
to reduce the strokes per minute.
3. To lock knob in ‘Off position, install a padlock through
the post above the knob as illustrated, and lock the
padlock, (Padlock is not supplied with the saw.)
WARNING: For your own safety, always push the
knob ‘Off’ when machine is not in use. Also, in the
event of a power failure (all of your lights go out),
push knob ‘Off. ‘Lockout’ your knob with a padlock
as shown. This will prevent the machine from start­
ing up again when the power comes back on.
15