Repeat this step with the rear weight guides (24) – Sears 831.15403 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12.
Attach the Front Weight Guides (136) to the Right
Top Frame (7) with two M10 x 38mm Screws (82)
and two M10 Washers (116).
Repeat this step with the Rear Weight Guides
(24).
13. Orient the Butterfly Frame (22) as shown. Attach
the Butterfly Frame to the Right Upright (4) with
two M8 X 72mm Bolts (91), two M8 Washers
(117), and two M8 Nylon Locknuts (115).
Do not
tighten the Locknuts yet.
Attach the Butterfly Frame (22) to the Right Top
Frame (7) with two M8 x 80mm Bolts (94), two
M8 Washers (117), and two M8 Nylon Locknuts
(115).
Do not tighten the Locknuts yet.
14. Attach the Left Seat Frame (10) to the Left Base
(2) with the two indicated M8 x 75mm Carriage
Bolts (84) and two M8 Nylon Locknuts (115).
Do
not tighten the Locknuts yet.
Attach the Left Seat Frame (10) to the Left
Upright (5) with two M8 x 80mm Bolts (94), two
M8 Washers (117), and two M8 Nylon Locknuts
(115).
Do not tighten the Locknuts yet.
Attach the Right Seat Frame (9) to the Right
Base (1) and the Right Upright (4) in the same
manner.
15. Attach the Dip Arm (20) to the Rear Upright (6)
with two M8 x 83mm Bolts (89), two M8 Washers
(117), the Rear Upright Plate (38), and two M8
Nylon Locknuts (115).
Make sure the indicated
handie is horizontal.
Tighten the M8 Nylon Locknuts (115) used in
steps 4^15.
10