Sears LIFESTULER SYSTEM 40 831.15931 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

52. Make sure that all parts are properly tightened. The use of all remaining parts will be explained in

USING THE LIFESTYLER SYSTEM 40, beginning on page 19 of this owner's manual.

WARNING: For your safety and benefit, attach all decals before using the cross training sys
tem.

Before using the cross training system, make sure that both of the cables are properly routed. Pull
the ends of both cables a few times to make sure that the cables move smoothly over the pulleys.
Move the butterfly arms and the leg press plate a few times. If either of the cables does not move
smoothly, locate and correct the problem before using the cross training system. IMPORTANT: If

the cables are not properly routed, they may be permanently damaged when used with

heavy weights.