Sears 113.24907 - Manual (Page 4)

unpacklrig and ciiecking contents
TOOLS NEEDED
Pliers
1/2 in. Wrench
The Copy-Crafter is shipped unassembled in one carton in
order to facilitate packaging. The step by step instructions
that follow oxplairi Kowi to asserififaie the Copy-Crafter and
how to make a project.
Before starting to assemble the Copy-Crafter, we suggest
you read this entire manual first to become familiar with
the names and location of the Various parts and how they
function.
Make sure that all of the items are removed from the
carton, identify them as shown in the illustration on page
24, Thefollowing illustrations will helpyouto identify some
of the hardware.
Also see List of Loose Parts on page 26.
ROUMD HEAD CARRIAGE BOLTS
9 Required 2 inches long
10 Required 3/4 inches long
SOCKET HEAD SET SCREWS
2 Required 1-3/4 inches long
2 Required 1/2 inches long
2 Required 1-1/4 inches long
with sharp point
HEXAGOM HEAD BOLT
1 Required 1-1/2 inches long
CENTER SCREW
1 Required 1-1/4 inches long
FLANGE NUTS
18 Required
PLAIN HEXAGON NUTS
15 Required
WASHERS
(o)
8 Required
TABLE OF CONTENTS
Warranty..................................................................................... • 2
General Safety Instructions . .. ......................................... 2
Additional Safety Instructions for the
Copy-Crafter..................................................................................3
Unpacking and Checking Contents .... .................................... 4
Assembly ......................................................................................5
Bed..........................................................................................5
Mounting Copy-Crafter
to lathe bench .. ... . ... . . .. . . . . . . . . . . . . . . . 6
Tool holder............................................................................ 2
Brackets ................................................................................®
Getting to Know Your Copy-Crafter .............................................10
Operation ....................... ...................... ...................... .. 14
Making Practice Cuts ....... ................................................ *
Duplicating from a Template
(Starter Project) ...... ............................................................
Duplicating a spindle
from an existing one ..................................... • • ..................
Repair Parts . .. .....................
List of Loose Parts .................................................................. 26