2 getting started, Package contents, Getting started – Philips LP2PB201CS User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Getting started
Package Contents
Besides the 21XLP -2 Light Probe, the package also includes everything needed for
hardware installation and software configuration.
After unpacking, check that the shipment contains the following items:
- The 21XLP -2 Light Probe light probe unit
- The 21 XLP-2 Light Probe base unit
- Three (3) cables for interconnection
- This user guide
- The 21 XLP -2 Light Probe software disks (for Windows and Apple), enclosed in
the plastic envelope at the end of this guide
If any components are damaged or missing, contact your authorized dealer.
If you do not encounter problems at this stage, you can proceed with the installation.
IBM PC system requirements
The software requires an IBM PC compatible system (80386 or better) with:
- 4 Mb of extended memory
- Hard disk and a 3,5” high density FDD
- A free RS 232 port
- Miaosoft Windows 3.1 or greater
- Microsoft compatible mouse (recommended)
Appie PC system requirements
The software requires an Apple Personal Computer with:
- 4 Mb of extended memory
- Hard disk and a 3,5" high density FDD
- A freeModem port to connect the Mac RS232 adaptor
- System 7.0 or later
- mouse (recommended)
Your computer and monitor manuals would also be useful.
Getting started