YSI MultiLab 4010-2 - Manual (Page 14)

Operation MultiLab 4010-2
14 ba76142e03 08/2013
4 Operation
4.1 General operating principles
4.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. ) generally indicates a short keystroke (press
and release) in this operating manual. A long keystroke (hold for approx. 2 sec)
is indicated by the underscore behind the key symbol (e.g. ).
Softkeys providing situation dependent functions, e.g.:
/[Info]: View information on a sensor
Switches the meter on or off
Selects the measured parameter
Calls up the calibration procedure
Displays the calibration data
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
Switches back to the higher menu level /
Cancels inputs
Saves a measured value manually
Opens the menu for the automatic save function
Displays the manually stored measured values
Displays the automatically stored measured values
<><>
<><>
Menu control, navigation
Opens the menu for measurement settings / Confirms
entries
Opens the menu for system settings
Outputs stored data to the interface
Outputs displayed data to the interface at intervals