YSI MultiLab 4010-2 - Manual (Page 13)

MultiLab 4010-2 Commissioning
ba76142e03 08/2013 13
3.3.1 Connecting the power pack
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 15.2
G
ENERAL DATA , page 120).
CAUTION
Use original power packs only (see section 15.2 G ENERAL DATA ,
page 120).
1. Connect the plug of the power pack to the socket for the power pack on
the MultiLab 4010-2.
2. Connect the original power pack to an easily accessible power outlet.
The meter performs a self-test.