YSI MultiLab 4010-2 - Manual (Page 12)

Commissioning MultiLab 4010-2
12 ba76142e03 08/2013
3 Commissioning
3.1 Scope of delivery
 MeterMultiLab 4010-2
 USB cable (A plug on mini B plug)
 Power pack
 Stand with stand base
 Short instructions
 Detailed operating manual
 CD-ROM
3.2 Power supply
The MultiLab 4010-2 is supplied with power in the following ways:

Mains operation with the supplied power pack
 Operation of the system clock with a buffer battery if there is no mains power
supply (see section 13.1.2 E
XCHANGING THE BATTERY , page 111).
3.3 Initial commissioning
Perform the following activities:

Connect the power pack
(see section 3.3.1 C
ONNECTING THE POWER PACK , page 13)
 Switch on the meter
(see section 4.2 S
WITCHING ON THE METER , page 19)
 Set the date and time
(see section 4.5.5 E
XAMPLE
2
ON NAVIGATION
: S
ETTING THE DATE AND TIME
,
page 25)
 Mount the stand
(see operating manual of the stand)