Compaq LA36 - Manual (Page 84)

4-30
Using Set-Up Mode
Changing Menu Access Options
You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-
Up options.
MENU ACCESS Option and Values
• Overprinted values are the factory settings.
MENU ACCESS
Option Values Description
Specify the type of access to the Set-Up functions
from the control panel or from the
menu.
ALL FUNC
All functions are accessible.
MACRO ONLY
Only
MACRO 1
and
MACRO 2
functions are accessible
from the menu.
NO ACCESS
Set-Up mode is inaccessible.
NO PANEL Font , Macro , and Protocol buttons are disabled even
in Normal mode. Set-Up mode is also inaccessible.
Note:
You can return to the All Functions Accessible mode
by turning the printer on while pressing the Park,
LF and FF/Load buttons at the same time. The
printer enters the Set-Up mode with this operation.
Exiting and Saving
This section describes how to exit the set up mode while saving any changes you have
made.
To exit the Set-Up mode with the settings saved, select the
SAVE&EXIT
function and press
the button or the button.
Any settings changed while in the Set-Up mode are saved as the new power-on defaults for
the printer. The new defaults remain active until you change them again.
Caution: To temporarily use your changes, press the Set-Up/Quit button. These changes
are lost at the next power-off.