Compaq LA36 - Manual (Page 80)

4-26
Using Set-Up Mode
INSTALL Options and Values
• Overprinted values are the factory settings.
I N S T A L L
Options Values Description
Specify a language to be used to print the Set-Up
menu functions and options.
ENGLISH
English
DEUTSCH
German
ESPANOL
Spanish
FRANCAIS
French
ITALIANO
Italian
Specify the (auto) start timing of tear off feeding.
AUTO 1 SEC
1 second after data stops from the computer.
AUTO 2 SEC
2 seconds after data stops from the computer.
AUTO 3 SEC
3 seconds after data stops from the computer.
AUTO 4 SEC
4 seconds after data stops from the computer.
AUTO 5 SEC
5 seconds after data stops from the computer.
MANUAL
Feed the paper for tear-off when the Pause button is
pressed.
NO TEAR
Tear off feeding is inhibited under any conditions.
Specify this setting for labels that tend to peel off
during backward feeding.
Specify the (auto) start timing of single sheet loading.
AUTO 1 SEC
1 second after a single sheet is set on the platen.
AUTO 2 SEC
2 seconds after a single sheet is set on the platen.
AUTO 3 SEC
3 seconds after a single sheet is set on the platen.
AUTO 4 SEC
4 seconds after a single sheet is set on the platen.
AUTO 5 SEC
5 seconds after a single sheet is set on the platen.
MANUAL
Load a single sheet when the FF/Load button is
pressed.
Enable or disable the printer status buzzer when a
fault condition occurs.
O N E
One beep for a period of about 500 ms
CONTINUOUS
Buzzer on until the fault condition is cleared.
OFF
Buzzer off under any condition.
(Single Sheet
Load)