Compaq LA36 - Manual (Page 54)

3-10
Printing
Removing Printed Pages
This section describes the best methods for removing single sheets or continuous forms
paper after printing.
Removing Single Sheets
When you print using software, the printer automatically ejects each sheet of paper when the
end of the printed page is reached. To eject sheets manually:
• Press the
FF/Load button to execute a form feed.
Removing Continuous Forms
To avoid wasting paper when removing printed continuous forms paper, the printer has the
tear-off function.
Depending on the
TEAR
option value of the Set-Up, the printer automatically feeds the
paper so that the perforation faces the tear bar. Tear the paper off. The paper will
automatically return to the Top-of-Form position when the printer receives data to print.
If you have set the
TEAR
option to
MANUAL
, you have to press the Pause button to move
the paper to the tear bar, and then to return the paper to the Top-of-Form position.
Note: See the section “Tearing Off Continuous Forms” in Chapter 2 “Paper Handling”.