Compaq LA36 - Manual (Page 81)

4-27
Using Set-Up Mode
I N S T A L L
Options Values Description
Assign buffer memory as the input buffer.
2 KBYTE
2K bytes
8 KBYTE
8K bytes
16 KBYTE
16K bytes
32 KBYTE
32K bytes
64 KBYTE
64K bytes
Note:
The larger the input buffer selected, the smaller the
download buffer reduced. Even with 64K bytes of
input buffer, a minimal download buffer is
provided. If you need a larger capacity for
downloading fonts, reduce the input buffer.
Select the type of interface to the computer.
PARALLEL
Centronics parallel interface
SERIAL
DEC-423 serial interface
AUTO
Both interfaces are ready for communication. The
printer communicates with the interface from which it
first receives data. The interface is active until the
input buffer becomes empty.
Specify the timing of regarding the selected protocol
or interface as being inactive when
AUTO
is specified
in the or option.
2 SEC
2 seconds elapsed after data stops from the computer.
4 SEC
4 seconds elapsed after data stops from the computer.
6 SEC
6 seconds elapsed after data stops from the computer.
8 SEC
8 seconds elapsed after data stops from the computer.
10 SEC
10 seconds elapsed after data stops from the computer.
12 SEC
12 seconds elapsed after data stops from the computer.
14 SEC
14 seconds elapsed after data stops from the computer.
16 SEC
16 seconds elapsed after data stops from the
computer.
18 SEC
18 seconds elapsed after data stops from the
computer.
20 SEC
20 seconds elapsed after data stops from the
computer.
(Interface Type)
(Auto Switch)