Compaq LA36 User Manual
Page 82
4-28
Using Set-Up Mode
I N S T A L L
Options
Values
Description
Setting of data transmission speed for DEC-423. The
baud rate is in bps (bits per second). Select the same
baud rate as that used by your computer or modem.
600 BPS
1200 BPS
2400 BPS
4800 BPS
9600 BPS
19200 BPS
Setting of data format for DEC-423.
Number of data bits
Parity bit
7 EVEN
7
Even
7 ODD
7
Odd
7 SPACE
7
Space *
7 MARK
7
Mark *
8 EVEN
8
Even
8 ODD
8
Odd
8 NONE
8
None
* The mark is logical 1. The space is logical 0.
CTL> Setting of data transmission buffer control for DEC-423. DTR The Data Terminal Ready signal is used. XON/XOF The DC1 and DC3 codes are used. Specify the disconnect control of the interface when a fault condition occurs. NO DTR is kept as it was. DROP DTR DTR is turned low and fixed. PULSE DTR DTR is turned low for five seconds and returned to the original state. (Buffer Control) (Disconnect on Fault)