Viconics VT7600W Installation Manual - Manual (Page 7)

7 | PIR Ready VT76xxW Series-Installation Guide
Screw terminal arrangement
Main outputs wiring
Wiring notes:
Note 1: Electromechanical contacts are to be used with the digital inputs. Electronic triacs
cannot be used as mean of switching for the input. The switched leg to the input for
the input to activate is terminal C (common)
Note 2: The transformer of the unit provides power to the Terminal Equipment Controller
and the additional loads that will be wired to the Terminal Equipment Controller.
T
YPICAL APPLICATIONS
VT7600W5X00(X)
Water Source Heat pump / Without Schedule
AU D1 D2 RS
Scom
WS MS
Y2 Y1 G RC C DEH O/B
5 pole left top connector 2 pole left top connector
7 pole bottom connector