Viconics VT7600W Installation Manual - Manual (Page 22)

22 | PIR Ready VT76xxW Series-Installation Guide
Schedule
uno hold
Hold permanent unoccupied forces the Terminal Equipment Controller
into a permanent unoccupied mode using the unoccupied setpoints. All
timed scheduling functions are by-passed.
The PERMANENT UNOCCUPIED status will appear in the automatic
status scroll. To resume to regular scheduling, user must scroll to the
Schedule Hold menu and select the Schedule resume option.
I
NSTALLER
C
ONFIGURATION
P
ARAMETER
M
ENU
 Configuration can be done through the network or locally at the Terminal Equipment
Controller.
 To enter configuration, press and hold the middle button “Menu” for 8 seconds
 If a password lockout is active, “Password” is prompted. Enter password value using the
“up” and “down” arrows and press “Yes” to gain access to all configuration properties of
the Terminal Equipment Controller. A wrong password entered will prevent local access to
the configuration menu.
 Once in the configuration menu, press the “No” button repetitively to scroll between all the
available parameters.
 When the desired parameter is displayed, press “Yes” to adjust it to the desired value
using
“up” and “down” arrows. Once set, press “Yes” to scroll to the next parameter.