Notice – VACUUBRAND PC 600 LAN NT User Manual
Page 48
page 48 of 102
- Readjustment: Adjustment of the pressure transducer under vacuum
and/or at atmospheric pressure, see also section “Readjustment of
- RS 232 parameters: Configuration of the interface, setting of parame-
ters and commands, see section “Interface parameters”, pg. 65.
- Sound: Switching the function ”acoustic warning signal” on/off.
- Pressure unit: Selecting the pressure unit mbar, Torr or hPa.
- Auto start: Process starts immediately after switching on the controller.
- Lighting: Setting of the lighting intensity of the display.
- Language: Selecting the menu language (English, German, French).
- Time delay: Delayed switching off of coolant and pump (not in mode
VACUULAN
)
- Control: Control of a valve or a pump via the IEC control line (only for
RC5/RC6
).
Program menu:
• Setting of the mode-specific parameters specific of the (e.g., preset
pressure).
Attention: The factory-set configuration determines the active menu
items!
Notes on configuring the controller
Time delay
• ”Delay” determines the time the coolant valve remains open after
the process has been stopped. Determines also the time the pump
(only with an in-line valve) remains running after the process has been
stopped.
Notes on selecting the factory-set basic mode
The controller VNC 2 can be adapted optimally to the spe-
cific application by choosing the appropriate factory-set
mode depending on the components, the application and
the process.
NOTICE