TriangleTube Prestige Cascade System - Manual (Page 22)

Pre-Installation Items
19
Item Kit Components
PSCAS17 (1/Boiler)
Quantity
1 Brass ¾” NPT 90 Degree Elbow 1
2 Brass ¾” NPT Shoulder Nipple 1
3 Brass ¾” NPT Tee 1
4 Brass ¾” Close Nipple 1
5 LWCO with Probe 1
6 Drywell ½” NPT with 1.5” Long Well 1
7 Heat Conductive Compound 1
8 High Limit 1
9 Wire Splice 1
Table 8 : Optional Kit Components – R/R Strainer
Item Kit Components
PSCAS24
(1/Cascade)
Quantity
1 Wye Strainer with 3" ANSI Flanges 1
2 Gaskets 2
3 Bolt & Nut (5/8 - 11" x 3") - Flanged 8
The CRR models (Reverse Return (R/R)) and the optional R/R with Valves kit do not include any balancing
valve(s). It is recommended to balance the flow through the individual R/R boilers. This balancing can be
accomplished by installing a balancing valve on the return pipe of each boiler.
BEST PRACTICE
Table 7: Optional Kit Components – CSD-1 for P/S & R/R with Valves
CSD-1 for R/R: The LWCO with probe, High Limit, Drywell and heat conductive compound can be ordered
separetely, see page 46 for part numbers.
NOTICE