Toa SR-PB5 - Manual (Page 6)

6
4. NOMENCLATURE AND DIMENSIONAL DIAGRAMS
4.1. SR-T5 Line Array Speaker
4.1.1. Speaker
4.1.2. Mounting Bracket A (accessory) 4.1.3. Mounting Bracket B (accessory)
[Top]
[Front] [Side] [Rear]
Used for temporarily suspending the speaker
at installation.
(Refer to p. 15 and p. 21.)
Unit: mm (inches) M10 Nut (for suspension use)
310 (12.2)
99 (3.9)
341 (13.43)
1239 (48.78) 1167 (45.94)
Recess
Side cover
(Input terminal section)
Side cover
(Mounting Bracket B
joint section)
Side cover
(Mounting Bracket A
joint section)
Safety wire mounting bolts
Use either of 2 bolts.
(Refer to p. 12.)
Blank panel
(The optional MT-S0601
Matching Transformer can
be installed inside.)
Input terminal
2.6 (0.1)
145 (5.71)
Unit: mm (inches)
273.2 (10.76)
213 (8.39)
173 (6.81)
4 - ш10 (0.39)
4 - ш12 (0.47)
50
(1.97)
80
(3.15)
For anchor bolt
(Refer to p. 12 and p. 15.)
Use this hole to joint the optional SR-PB5
Wall Pan Bracket. (Refer to p. 18.)
2.6 (0.1)
Unit: mm (inches)
273.2 (10.76)
213 (8.39)
173 (6.81)
50
(1.97)
80
(3.15)
90
(3.54)
4 - 10 x 12 (0.39 x 0.47)
4 - 12 x 14 (0.47 x 0.55)
For anchor bolt
(Refer to p. 12 and p. 15.)
Use this hole to join the optional SR-PB5
Wall Pan Bracket. (Refer to p. 18.)