Toa SR-PB5 - Manual (Page 14)

14
9.1.3. Installation procedure
The example here shows the procedure to install the speaker on the left side wall as viewed toward the stage.
Step 1. Install the anchor bolts for the brackets and safety wire into the wall.
Use M10 anchor bolts.
Note: For the anchor bolt mounting position, refer to p. 12, “Anchor Bolt Mounting Dimensions.”
9.1.2. Rough installation plan
Mounting Bracket A (accessory)
Anchor bolt (required separately)
Wall surface
Mounting Bracket B (accessory)
Speaker
Safety wire (accessory)
Anchor bolts driven into a wall and their suited nuts are not included. Use bolts and nuts that are
appropriate for the wall's material and construction.
Failure to do so may cause the unit to fall, resulting in personal injury.
WARNING