Canon Z5000 - Manual (Page 80)

3
3-44 Performing Setup from the Control Panel
Change Password
Change Password enables you to set or change the Administrator password for the
ColorPASS. Anyone with the Administrator password can modify the Setup options,
and control the flow and order of print jobs with the job management tools.
When the ColorPASS is installed, there is no password. If you do not create an
Administrator password, users are not required to enter a password to modify the
Setup or use the administrator functions in the job management tools. If an
Administrator password has been set previously, you are required to enter it when you
run Setup. Use the up and down buttons to select the characters and the left and right
arrow buttons to move between them (see “Types of Setup screens” on page 3-5).
For more information on Administrator access privileges, see page 2-3.
For information on controlling print jobs with the job management tools, see the
Job Management Guide.
N OTE : The Operator password can be set and changed from the Command
WorkStation only.
T O CHANGE THE C OLOR PASS PASSWORD :
New Password
Use the up and down buttons to select the characters and the left and right arrow
buttons to move between them. Enter characters from left to right, since the left arrow
line selection button is a delete key. The password can be any combination of letters
and numbers up to 19 characters. Choose OK when you are done. Be sure to keep
track of the password.
1. Scroll the main Setup menu and choose Change Password.
2. Enter and confirm the password as described below.
PS Setup
Color Setup
Job Log Setup
Change Password
Setup