Canon Z5000 - Manual (Page 74)

3
3-38 Performing Setup from the Control Panel
Print to PS Error
Yes/No [No]
Specify whether the ColorPASS should print the available portion of a print job when
it encounters a PostScript error. Select Yes to print the portion of the job that was
processed before the error occurred; select No to cancel the print job entirely when a
PostScript error is encountered. Leave this option at No unless you encounter printing
problems.
Allow Courier Substitution
Yes/No [Yes]
Specify whether to substitute Courier for fonts that are unavailable when you
download files to the ColorPASS, or when you print a document for which you do not
have the corresponding printer font. If this option is set to No, jobs with fonts that are
not available on the ColorPASS hard drive generate a PostScript error and do not
print. This setting does not apply to PDF files; font substitution occurs automatically
for PDF files.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in PS Setup; select No to return to the main
Setup menu without making any changes.
Color Setup options
Color Setup allows you to set defaults the ColorPASS uses to control color output.
Mac OS and Windows users who use the printer drivers provided on the User
Software CD can override most of these defaults on a job-by-job basis. However, users
printing from UNIX or DOS command lines cannot override defaults from their
applications. Therefore, you must set defaults in Color Setup.
The preferred method for setting color defaults is to use Color Setup, part of the
ColorWise Pro Tools. The color options are described in this section for your
reference. For information about these defaults, see the Printing Guide and the Color
Guide.