Canon Z5000 User Manual
Page 140
5
5-20
Setting up Network Servers
T
O
SET
UP
TCP/IP
FOR
COMMUNICATION
WITH
THE
C
OLOR
PASS:
1.
A superuser (with root login) must add the ColorPASS to the network’s IP host table or
other system database of network printers.
2.
In the file or utility used by your network, specify the remote printer name, the print
server protocol, the queue, and the spool file for the ColorPASS name you assigned.
3.
Make the ColorPASS available as a printer to other network users.
4.
To verify the TCP/IP connection, ping the IP address or the host name. From any
computer on the network, at the command prompt, type:
ping
Type the ColorPASS IP address assigned in ColorPASS Network Setup.
After the ColorPASS is set up as a network printer, you can also ping the name you
gave to the ColorPASS:
ping
The server should respond with a message such as
Reply from
Some systems will respond with a continuous display of output from the IP address. To
stop the output, type
Control-C.
You can use the
ping
command at any time.