TeeJet CenterLine 230BP - Manual (Page 14)

CenterLine 230BP
020-020-UK R0
13
3. Use the Change Page key to advance the
screen views.
Compass View/Return to Point
Press the Return to Point key to
establish a point in memory. Normal
guidance will continue uninterrupted
during this process.
To navigate back to the established
point, press the Return to Point
key again. The Compass View
screen will be displayed and will pro-
vide navigation assistance to return
to the established point.
Push the Return to Point key a
third time to erase the stored point
and return to the navigation screens.
A+ Nudge Feature
The A+ Nudge feature allows the existing A-B guide-
line to be shifted to the vehicle’s current location.
Press the Mark A/B key immediately followed by
pressing the Plus key.
Pressing the Minus key after pressing the Plus
key will abort the nudge feature and the guideline will
remain the same.
A-B line. The CL230BP will immediately begin
providing navigation information with the light-
bar and Navigation Screen.
3. Use the Change Page key to advance the
screen views.
Circle Pivot Guidance
Circle Pivot guidance provides guidance around a
central location that radiates outward.
1. Use the Guidance Mode key to select Circle
Pivot guidance.
2. Drive to the desired location of Point A. With the
vehicle in motion, press the Mark A/B key
to establish Point A. Point B will be displayed
on the screen. Drive to the location of Point B
and press the Mark A/B
key again to estab-
lish the A-B line. Point B must be at least 1/2 of
the way around the circle to complete the circle
pivot. Once Point B has been established, the
CL230BP will immediately begin providing navi-
gation information with the lightbar and Naviga-
tion Screens.
Establish
Point A
+0
6.0 MP
+0
6.0 MPH
Establish
Point B
H
+0
6.0 MPH
0.0
Navigation
Screen
km/h
+0
6.0 MPH
Establish
Point A
Establish
Point B
+0
6.0 MPH
+0
6.0 MPH
0.0
Navigation
Screen
A
B
km/h km/h
6.0 MPH
km/h km/h km/h
M
km/h