TeeJet LH 3000 - Manual (Page 20)

LH 3000 OPERATING MANUAL
20 LH A GRO
JOBNO
The job number is used for numbering the job in question.
Therefore the use of “JOBNO” is only of interest when print of job cards is
required.
EXAMPLE OF OPERATING THE KEY:
Registration of the job number 1234567:
1. Press for 3 seconds until the figure keys are lit.
2. Encode 1 2 3 4 5 6 7. As the display is only 5-figured it will change between
1 2 and 3 4 5 6 7 in the next picture.
3. Press . Numerical keyboard disappears and the above job number
has been registered.
NOTE: To avoid errors (several job cards with the same job number) the encoded
job number is deleted when storing in the memory (by he “MEMO” key).
MEMO
“MEMO” means memory. The key is used for storing recorded data (job cards) in
the memory. Trip counters for area, time and litre consumption from tank are
zeroed simultaneously with storing.
OPERATION OF THE KEY:
1.
Select one of the 3 functions (say TIMER).
2. Press “MEMO” until “STO” is displayed followed by 3 quick warning tones.
3. The following has taken place:
A.
The 3 counters mentioned have been zeroed.
B. Data are stored in the memory for later print or transmission to PC.
C. Jobno. Changes to “0”.
NOTE: The 3 counters mentioned are zeroed simultaneously.