TeeJet LH 3000 - Manual (Page 15)

LH 3000 OPERATING MANUAL
LH AGRO 15
FUNCTION KEYS
RPM
By pressing this key RPM will be displayed (sensor must be mounted).
WARNING: Is control of RPM wanted the wanted RPM figure must be encoded
here as follows:
1. Press for app. 3 seconds, until figure keys are lit.
2. Encode the wanted RPM.
3. Press again.
NB!
The maximum deviation to be encoded during encoding (“SYSTEM”-key)
point 08.
The warning function is only active when the implement operates.
TIMER
The timer shows consumed working time.
The timer is started and stopped by pressing the key. A flashing dot indicates
“operation”, a fixed point “stop”.
The timer counts to maximum 99 hours and 59 minutes after which it will restart
from zero. The consumed time can be stored for later print of job cards. See
“JOBNO” and “MEMO”.
ZEROING OF TIMER
Press “MEMO” until 2 horizontal bars and “STO” is displayed simultaneously with
3 quick warnings.
The timer is zeroed.
NOTE: Zeroing of timer causes zeroing of consumption from tank and area trip
simultaneously.
SPEED
Forward speed.