TC-Helicon VoicePro - Manual (Page 40)

40
Section 6: Detailed Parameter Descriptions
UTILITY | MIDI
The UTILITY / MIDI Tab configures MIDI functionality.
Below are descriptions of the various parameters:
CC Channel
Sets the channel to send and receive user interface control
messages (CCs).
VirtuaLead Channel
Sets the channel to receive Notes and pitch-bend
information for the VirtuaLead Pitch Block. How the Pitch
Block reacts to MIDI depends on the Pitch mode. See
PITCH / MODE for more information.
Harmony V1(all) Ch, V2-4
Sets the MIDI channel to receive notes and pitch-bend
information for the Harmony Block. "Harmony V1(all) Ch"
is the only channel used if the harmony mode is set to
Chord or Notes Mode. If the Harmony Mode is set to
"Notes 4 Channel", then the MIDI channels for Voice 2, 3,
and 4 are used for shifting the associated voices.
Filter
With this parameter, VoicePro can ignore Program
changes, SysEx, or both types of MIDI messages.
MIDI Clock
Determines whether global tempo is derived from MIDI
Clock or from the Tap Tempo Button.
Split Zone/Note
The Split Zone and Split Note Parameters divide the
keyboard into two zones. Notes coming from the one zone
are ignored while notes from the other zone are treated as
valid. Split Note Parameter sets the split point in MIDI.
Split Zone Parameter defines if notes above or below the
split note are accepted.
Notes Transpose
Transposes the incoming MIDI notes a specified number of
octaves. This applies to all incoming notes whether they
are destined for the Harmony or Pitch Block.
UTILITY | CC Assign
VoicePro contains a configurable CC assignment engine.
Up to 70 of VoicePro's preset parameters can be assigned
to any CC.
CC Assign Style
VoicePro contains several CC Assign Styles. This is a quick
way to get external control setup. The included styles
emulate aspects of other TC-Helicon products or typical
external control applications:
- Default - standard for VoicePro
- VoicePrismPlus
- VoiceWorks
- VoiceLive
- VoiceOne
- Quintet
Assigning CCs
Each of the 70 assignments has its own editing row. In the
edit row, choose the parameter and then the CC number.
Parameters and CCs must be mapped in a one-to-one
relationship.