Solvline Eddy DK Ver 2.20 - Manual (Page 69)

Chapter 9. Appendix
위의 이미지 중 붉은 색으로 표시된 부분이 펌웨어 버전 정보이다. 이 두 버전 정보가 일치 하지
않는 다면
다음의 과정을 통해서 일치 시킨다.
To change Eddy’s temporary IP address and TFTP server’s IP address proceed as follows.
netmask=255.255.255.0
ipaddr=192.168.0.223
serverip=192.168.0.220
FileSystem_Size=0
FileSystem_Version=20a
Config_Version=20a
bootargs=root=/dev/ram rw console=ttyS0,115200,mem=32M
bootcmd=cp.b ${OS_FLASH} ${OS_SDRAM} 0x110000; cp.b ${FileSystem_FLASH}
${FileSystem_SDRAM} 0x280000; bootm ${OS_SDRAM} ${FileSystem_SDRAM}
bootdelay=1
baudrate=115200
ethaddr=00:05:F4:11:22:33
Config_Size=10000
stdin=serial
stdout=serial
stderr=serial
OS_Size==20000000
filesize=1f0f07
fileaddr=20000000
OS_SDRAM=0x20000000
FileSystem_SDRAM=0x20500000
Bootstrap_Version=20a
bootloader_Version=20a
OS_Version=20a
Bootstrap_END=0x10000FFF
bootloader_END=0x1001DFFF
BootEnv_END=0x10001FFF
OS_END=0x1012DFFF
FileSystem_END=0x103ADFFF
Config_END=0x103FFFFF
Download_SDRAM=0x20000000
bootloader_FLASH=0x10002000
BootEnv_FLASH=0x10001000
OS_FLASH=0x1001E000
FileSystem_FLASH=0x1012E000
Config_FLASH=0x103AE000
U-Boot> printenv
Bootstrap_FLASH=0x10000000
9-3