Solvline Eddy DK Ver 2.20 User Manual
Page 42
Chapter 5. Creating Firmware
[shlee@localhost firmware]$
ftp 192.168.0.223
Connected to 192.168.0.223.
Name (192.168.0.223:shlee): eddy
331 Please specify the password.
Password:
230 Login successful.
ftp>
cd /tmp
250 Directory successfully changed.
ftp> bin
200 Switching to Binary mode.
ftp
> put eddy-fs-20a.bin
local: eddy-fs-20a.bin remote: eddy-fs-20a.bin
227 Entering Passive Mode (192,168,0,223,195,50)
150 Ok to send data.
226 File receive OK.
2104287 bytes sent in 0.47 seconds (4.3e+03 Kbytes/s)
ftp>
by
221 Goodbye.
[shlee@localhost firmware]$
Use Telnet to check eddy-fs-20a.bin is in the /tmp directory.
Use “upgrade eddy-fs-20a.bin” command to update the firmware.
#
#
upgrade eddy-fs-20a.bin
FileSystem Erase ... 2388341 Bytes
FileSystem Write ... eddy-fs-20a.bin, 2388341 Bytes
.....................................................................................................................
Flash Write OK
.....................................................................................................................
Flash Verify OK
Update Complete
please reboot the system!
eddy-fs-20a.bin
# ls eddy-fs-20a.bin
/tmp
# pwd
5-5