Solvline Eddy DK Ver 2.20 - Manual (Page 49)

Chapter 6. Library
6-6
Returns None
Notice Contols Ready LED mounted at each Eddy model.
6.5 Serial functions
These functions are used to handle internal serial port and UART.
SB_OpenSerial
Function Opens serial port.
Format int SB_OpenSerial (int Port_No);
Parameter Port_No Serial port number
0: First serial port
1: Second serial port
(Only available for Eddy-CPU, Eddy-DK)
Returns -1 ~ N Opened serial port handle
-1: Open error
N: Opened serial port handle
Notice Eddy provides maximum two serial ports; however for normal model where
Eddy-CPU is mounted, Eddy only provides one serial port.
DK board has two on-board serial ports. User can use both of the serial
ports if the user sets DIP switch on DK board to make it recognized as
Eddy-CPU or Eddy-DK.
SB_InitSerial
Function Initialize data communication configuration of serial port.
Format Void SB_InitSerial (int Handle, char Speed, char LCR, char Flow);
Parameter Handle Serial port handle acquired from OpenSerial
Speed Baud rade