beautypg.com

2 ipchskit (chassis) installation – SilentKnight IP Communicator User Manual

Page 6

background image

6

IP Communicator Series Installation Document — P/N 53109:I 4/26/2010

2.1.2 IPCHSKIT (Chassis) Installation

1.

Secure the IPDACT Module to the IPCHSKIT mounting plate using the four supplied standoffs as illustrated in
Figure 4.

2.

Install the IPCHSKIT mounting plate into the chassis and secure with the supplied screws. (For specific chassis
installations, refer to the IPCHSKIT Installation Document #53294.)

3.

Wire the IPDACT as described in the following sections of this document.

4.

Attach the polycarbonate cover with label to the IPDACT by pressing it onto the four standoffs installed in step 1.

IPCHSKIT mounting plate

IPDACT Module

polycarbonate cover with label

standoffs

2 screw locations

2 screw locations
(underneath)

Figure 4 IPCHSKIT Installation

ipch

skit.wmf