SilentKnight 5496 6A Intelligent Remote Power Supply - Manual (Page 21)

151276 A-1
Appendix A
Compatible Devices
For proper operation, you must use polarized devices with a Model 7628 4.7k ohm EOL
resistor on each circuit. All supervised notification appliances used with the IFP-FFT must be
polarized.
A.1 Notification Appliances
Note: Not all devices can use the Sync feature, be sure to check A.1 to ensure the device you have chosen will
work with this feature. This control is UL listed for single circuit synchronization.
Table A-1 below lists notification appliances compatible with the fire alarm control panel.
Appliances which can be synchronized indicate the type of sync available in the columns
marked Audio and/or Visual
Table A-1: Compatible Notification Appliances
Manufacturer Model Audio Visual Type
AMSECO
SH24W-153075   Horn/Strobe
SAD24-153075  Strobe
SAD24-75110  Strobe
SL24W-75110  Strobe
SL24C-3075110  Strobe
SLB24-75  Strobe
RSD24-153075  Strobe
RSD24-75110  Strobe
SH24W-75110   Horn/Strobe
SH24W-3075110   Horn/Strobe
SHB24-75   Horn/Strobe
SCM24W-153075  Chimes/Strobe
SCM24W-75110  Chimes/Strobe
SCM24C-3075110  Chimes/Strobe
SCM24C-177  Chimes/Strobe
H24W  Horn
H24R  Horn