Reznor HRPD Parts Manuals - Manual (Page 23)

Form P-RG/RP/RBL, P/N 263984R4, Page 23
Code Description P/N
Components by Option AR__ for "BL" Blower Cabinets
(refer to wiring diagram for applicable motorized AR Option)
6 7 8 9* 11* 12* 13* 14* 15 16* 17 18 23* 25
362 Hand Quadrant #14004728-001 103502 X X
363 Manual Damper Control Bracket (replaces P/N 103488) 143182 X X
364
2-Position Actuator, J/C M9208-BGC-3 (use of this model
effective 01/2012 on Model RPB)
209351 X X X X
2-Position Actuator, M/H MS8105A1130/U (effective
04/2012 on Models RPBL and RBL)
263939 X X X
Replacement Kit for other 2-position damper actuator models including P/N 66276, 97385, and 209351 labeled J/C M9206-BGB-2) is Kit P/N 209423.
366 Modulating Damper Motor, #M9175A1051 (no end switch)
Motor Support, P/N 100315
115681 X X X X X X X
367 Optional Modulating Damper Motor, #M9185A1026
(Replacement requires auxiliary switch kit, P/N 145881.) 202091
X X X X X X X
368 Floating Modulating Damper Motor, #M6194B1011
Motor Support, P/N 100315
115683 X
369 Damper Rod, 1/4 x 12 inches long
Current "BL"
damper linkage
illustrations are
not available.)
Some previously
used damper
linkage
arrangements are
on pages 25-26.
11561 X X X X X
370 Damper Rod, 1/4 x 13 inches long 112554 X X X X X X
371 Damper Rod, 1/4 x 18 inches long 11560 X X X X
372 Damper Rod, 1/4 x 17 inches long 112556 X X X X X X X X
373 Damper Rod, Bent (drawing, page 22) 105420 X
374 Damper Rod Arm 66278 X
377 Damper Arm, M/H #20265 12635 X X(2) X X(2) X(2) X(2) X(3) X(2) X(2) X(3) X(2) X(2) X(2)
378 Ball and Socket, M/H #27518 12636 X(2) X(2) X(2) X(4) X(4) X(4) X(4) X(4) X(4) X(4) X(4) X(4) X(4)
380 Crank Arm M/H #221455A 116209 X X X X X X X X
382 Damper Arm Support Plate 14225 X
384 Damper Arm Adjustment Plate 115687 X X X X X X X
385 Damper Arm Adjustment Plate 142982 X
386 Air Controller Support Bracket 103758 X X X X X X
387 Potentiometer, M/H #112894FA 16110 X X X X
388 Mixed Air Controller, M/H #T991A-1004 16109 X X X
389 Outdoor Air Controller, J/C#A19AAF-120 126170 X X X
390 Null Switch (pressure), Dwyer #1640 88052 X
391 Auxiliary End Switch only for M/H Damper Motors, #Q607B1067, P/N 113963
392 Auxiliary Switch Kit (2 switches), M/H 220736B, P/N 145881
393 DDC (4-20ma) interface module for use with modulating damper motor, Honeywell Q7230A, P/N 171134 X
35°
7”
(178mm)
9-3/4” (248mm)
1/4” Code 373 - Bent
Damper Rod,
P/N 105420
NOTES: Crank Arm Code 380A is used with motors P/N 115682, 115683, & 115681 (motors used in currently manufactured units).
Use Crank Arm P/N 20874 (illustrated), M/H #7616BR, with obsolete motors P/N 53928, 87059, and 96767.
377
382
378
380A
See note
above.
P/N
20874
Code 391 -
Auxiliary End
Switch, P/N
113963, M/H
Q607B1067
Code 390 - Pressure
Null Switch, Dwyer
#1640-0, Range .01"
to .2" w.c., P/N 88052
Code 387 -
Potentiometer,
M/H 112894FA,
P/N 16110
Code 388 - Mixed Air Controller,
M/H T991-1004, P/N 16109
Grommet Clamp,
P/N 39224
Code 389 - Outside
Air Controller, J/C#
A19AAF-120, P/N 126170
(replaces P/N 16108)
Code 393 - DDC (4-20
ma) interface module
for modulating
damper motor, P/N
171134, M/H Q7230A
* Option Code is no longer available.