Rev-A-Shelf 3450-11XX User Manual
Stemware installation instructions, For the 3250xx
1.
Position top of Stem-Clip to bottom of cabinet floor.
2.
Secure Stem-Clip in place with #6 x 3/4” oval head screw.
3.
Insert stemware into Stem-Clip, align front of stemware
tangent to cabinet face.
4.
Secure Stemware in place with #6 x 3/4” oval head screw.
For the 3150-11XX
For the 3150-16XX
1.
Position front of stemware tangent to cabinet face.
2.
Secure front in place with #6 x 3/4” oval head screw.
3.
Secure rear in place with #6 x 3/4” oval head screw.
For the 3250XX
1.
Position front of bottle rack tangent to cabinet face.
2.
Secure in place with (2) #6 x 3/4” oval head screws.
3.
Use a wine bottle to determine location of rear bottle holder.
A spacer may be needed between holder and bottom of cabinet.
4.
Secure in place with (2) #6 x 3/4” oval head screws.
For the 3450-11XX
1.
Position top of Stem-Clip to bottom of cabinet floor in 2 places.
2.
Secure Stem-Clips in place with #6 x 3/4” oval head screw.
3.
Insert stemware into Stem-Clip, align front of stemware tangent
to cabinet face.
4.
Secure Stemware in place with (2) #6 x 3/4” oval head screws.
STEP 1
STEP 2
STEP 1
STEP 2
Stemware Installation Instructions
I-STEM-TRI
04.07