Rev-A-Shelf 432-BF-XX - Manual

“Changing the way you think about cabinet organization!”
“Cambiamos su percepción sobre la organización de armarios”
“Nous changeons votre conception de l’aménagement des armoires”
www.rev-a-shelf.com
1-800-626-1126
432 Series Filler Pullout Instructions
Instrucciones del armario de relleno deslizante – Serie 432
Directives de montage du module coulissant série 432
I-432-TRI-1012
Fig 1
Step 1. Measure scribe rail thickness and length per your
See Fig 1
Fig 2
Step 2. Install upper and lower scribe rails
or brads. See Fig 2. Note: Align scribe rails
scribe rail to upper section of base cabinet
lower mounting strap or lower section of
wall cabinet lower mounting strap. See
Figs. 3a-b.
Top Scribe Rail is nailed to
bottom edge of top section
Fig 3a
Wall Cabinet
Bottom Scribe Rail is nailed
to edge of bottom section
Top Scribe Rail is
nailed to edge of
top section
Fig 3b
Base Cabinet
Bottom Scribe Rail is
nailed to edge of
bottom section
Fig 4a Fig 4b
Step 3. (Base Cabinets). Pre-drill 3/16 inch holes 3/8
inch down from top of cabinet and also 27-3/4” down
from top of cabinet. (See Fig 4a-d). Repeat with other
adjacent cabinet.
Fig 5a Fig 5b
Step 4.
See Fig. 5a-b
Fig 6
Step 5.
to adjacent cabinet 2. See Fig. 6
Fig 8 Fig 9
Step 7. Attach face frame and onlays (not provided) See Fig. 8-9
Fig 7
Step 6. Remove front mounting strap.
See Fig 7.
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face Frame
From inside the adjacent
cabinet screw the 432 to
cabinet top.
Fig 4c Wall Cabinet
Screw 432 to cabinet bottom
from below adjacent cabinet.
Screw 432 to cabinet top
from above adjacent
cabinet.
Fig 4d Base Cabinet
From inside and
above the adjacent
the 432 to cabinet
bottom.
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face Frame
p