Cabletron Systems ESX-1380 - Manual (Page 73)

MIB Navigator Command Set Overview
ESX-1320/ESX-1380 Local Management Guide 13-9
set:
Syntax: set
Description: The set command enables you to set the value
of a managed object. This command is valid
only for leaf entries in the current MIB tree, or
for managed objects in the MIB.
If the leaf specified does not exist for the given
path, MIB Navigator asks for a value. The
following lists possible value types:
(i)nteger - number
(c)ounter - number
(g)auge - number
(t)ime ticks - number
o(p)aque - “value” (with quotation marks)
(s)tring - “value” (with quotation marks)
(o)id - OID number with dotted punctuation
(a)ddress - IP address in DDN format
(m)ac - MAC address in hexadecimal format
(n)ull - no type
Options: Not Applicable
Example:
MIBNav-> set /1/3/6/1/4/1/52/1/6/4/7 122.1.1.1
Type: (i)nteger (a)ddress (c)ounter (g)auge (o)id:
051463