Cabletron Systems ESX-1380 - Manual (Page 43)

ESX-1320/ESX-1380 Local Management Guide 6-1
CHAPTER 6
THE SNMP TRAPS SCREEN
This chapter explains how to configure the SNMP Traps screen to allow
the ESX to send traps to as many as eight remote management
workstations. SNMP traps are messages about network events and device
operational statistics. The following sections explain SNMP Trap screen
fields and instructions for configuring them. Figure 6-1 shows the SNMP
Traps screen.
Figure 6-1 The SNMP Traps Screen
6.1 TRAP TABLE SCREEN FIELDS
The following definitions explain each of the SNMP Traps screen fields:
Trap Destination
Use this field to enter the IP address of the management workstation
designated to receive SNMP traps from the ESX.
SNMP TRAPS
Trap Community Name Trap Destination Enable Traps
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
public
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
SAVE RETURN
090825
public
public
public
public
public
public
public
Event Message Line
ESX-13XX Local Management Flash Image Version: XX.XX.XX