Cabletron Systems ESX-1380 - Manual (Page 56)

Chapter 10: The Port Redirect Function Screen
10-2 ESX-1320/ESX-1380 Local Management Guide
10.1 PORT REDIRECT FUNCTION SCREEN FIELDS
The following list describes each of the Port Redirect Function screen
fields:
Source Port (Read-only)
Shows which ports are currently set as source ports.
Destination Port (Read-only)
Shows which ports are currently set as destination ports.
Source Port [n] (Selectable)
Allows you to select a port [n] to be changed to a source port.
Destination Port [n] (Selectable)
Allows you to select a port [n] to be changed to a destination port.
Status Port (Selectable)
Allows you to add or delete a source port and/or a destination port.
10.2 CHANGING SOURCE AND DESTINATION PORTS
Add or delete source port and destination port entries, as follows:
1. Use the arrow keys to highlight the SOURCE PORT command field.
2. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the port number displayed in the brackets [n] until the
appropriate port number is displayed.
3. Use the arrow keys to highlight the DESTINATION PORT
command field.
4. Use the SPACE bar or BACKSPACE again to step to the appropriate
port number for the destination port.
5. Use the arrow keys to highlight the STATUS command field.
6. Use the SPACE bar to select either the ADD or DEL (delete) option.
Press ENTER. This adds or deletes the port selections made in steps 2
and 4 and also updates the screen SOURCE PORT and
DESTINATION PORT list.